Search in Category

Roughing & Finishing End Mills

Search Filters

  • ingersoll-cutting-tools x
  • 0.75 in x

Filter Your Search

Please note: All items are not yet available for use with our Filtered search.
If an item is not available via the filters, try searching for the part number or description using the search box at the top of the page.

Roughing & Finishing End Mills

Cutting Tools » Milling » End Mills » Roughing & Finishing End Mills 
Viewing Page 1 of 1 (6 results)

INGCUT 3032249 IN2005 Solid Carbide 0.25 Dia End Mill

Item #: INGCUT 3032249
Supplier #: 3032249

INGCUT 3032249 | End Mill | With Neck Relief | Solid Carbide | 0.25 Inch Diameter | 4 Flutes | 0.5 Inch Length of Cut | 2.5 Inch Overall Length | Cylinder Shank
Avail in Other Locations
UOM : EA
$55.08

INGCUT%205622432

INGCUT 5622432 IN2005 Solid Carbide 0.25 Dia End Mill

Item #: INGCUT 5622432
Supplier #: 5622432

INGCUT 5622432 | End Mill | Solid Carbide | 0.25 Inch Diameter | 4 Flutes | 0.5 Inch Length of Cut | 2.5 Inch Overall Length | Cylinder Shank | Variable Pitch
Avail in Other Locations
UOM : EA
$45.54

INGCUT%205622930

INGCUT 5622930 IN05S Solid Carbide 0.25 Dia End Mill

Item #: INGCUT 5622930
Supplier #: 5622930

INGCUT 5622930 | End Mill | Solid Carbide | 0.25 Inch Diameter | 3 Flutes | 0.35 Inch Length of Cut | 2.5 Inch Overall Length | Cylinder Shank | Variable Pitch
Avail in Other Locations
UOM : EA
$42.12

INGCUT%203029648

INGCUT 3029648 IN2006 Solid Carbide 0.25 Dia End Mill

Item #: INGCUT 3029648
Supplier #: 3029648

INGCUT 3029648 | End Mill | Solid Carbide | 0.25 Inch Diameter | 4 Flutes | 0.012 Inch Length of Cut | 2.5 Inch Overall Length | Cylinder Shank | Equal Cutter Pitch
Avail in Other Locations
UOM : EA
$52.18

INGCUT%203029979

INGCUT 3029979 IN05S Solid Carbide 0.25 Dia End Mill

Item #: INGCUT 3029979
Supplier #: 3029979

INGCUT 3029979 | End Mill | Solid Carbide | 0.25 Inch Diameter | 3 Flutes | 0.35 Inch Length of Cut | 2.5 Inch Overall Length | Cylinder Shank | Variable Pitch
Avail in Other Locations
UOM : EA
$42.12

INGCUT 5622300 IN2005 0.25 Dia 4 F 2.5 OAL End Mill

Item #: INGCUT 5622300
Supplier #: 5622300

INGCUT 5622300 | End Mill | Rougher with Chip Splitter | 0.25 Inch Diameter | 4 Flutes | 0.5 Inch Length of Cut | 2.5 Inch Overall Length | Cylinder Shank | Right Hand
Normal lead time 2-5 days
UOM : EA
$45.58