OSG 1400119905 HY-PRO® NRT® 14001 Performance Thread Forming Tap, #10-32 Thread, H3 Thread Limit
- Thread Size: #10-32
- Overall Length: 2.375 in
- Thread Standard: UNF
- Finish/Coating: TiN Coated
- Chamfer Type: 1.5P Short Bottoming
- Cutting Direction: Right Hand
- Finish: TiN
- Measurement System: Imperial
- Overall Length - Decimal: 2.37 mm
- Series: HY-PRO® NRT® 14001
- Square Size: 0.252 in L x 0.152 in W
- Thread Length: 0.516 in
- Thread Limit: H3
- Type: Forming
- Shank Diameter - Decimal: 0.194 in
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Forming taps work by compressing the work material
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
OSG Thread Forming Tap | Performance | Series: HY-PRO NRT 14001 | Measurement System: Imperial | #10-32 | UNF | 1.5P Short Bottoming Chamfer | 0.516 in Thread Length | 2.37 in Overall Length | Right Hand Cutting | 0.194 in Shank Dia | 0.1741 to 0.1776 in Tap Drill | 0.252 in L x 0.152 in W Square Size | HSS-Co | TiN Coated | H3 Thread Limit