OSG 1410103305 HY-PRO® NRT® 14101 Thread Forming Tap, M5x0.8 Thread, D7 Thread Limit
- Thread Size: M5x0.8
- Overall Length: 60.32 mm
- Finish/Coating: TiN Coated
- Chamfer Type: 2.5P Bottoming
- Class of Fit: 6H
- Cutting Direction: Right Hand
- Finish: TiN
- Measurement System: Metric
- Overall Length - Metric: 60 mm
- Series: HY-PRO® NRT® 14101
- Shank Diameter - Decimal: 4.92 mm
- Square Size: 6.4 mm L x 3.86 mm W
- Thread Length - Metric: 10 mm
- Thread Limit: D7
- Type: Forming
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Forming taps work by compressing the work material
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
OSG Thread Forming Tap | Series: HY-PRO NRT 14101 | Measurement System: Metric | M5x0.8 | 2.5P Bottoming Chamfer | 10 mm Thread Length | 60 mm Overall Length | Right Hand Cutting | Class of Fit: 6H | 4.92 mm Shank Dia | 4.59 to 4.67 mm Tap Drill | 6.4 mm L x 3.86 mm W Square Size | HSS-Co | TiN Coated | D7 Thread Limit