OSG 1400153601 HY-PRO® NRT® 14001 Performance Thread Forming Tap, 3/4-10 Thread, H7 Thread Limit
- Thread Size: 3/4-10
- Overall Length: 4.25 in
- Thread Standard: UNC
- Finish/Coating: Steam Oxide
- Chamfer Type: 2.5P Bottoming
- Class of Fit: 3B
- Cutting Direction: Right Hand
- Finish: Steam Oxide
- Measurement System: Imperial
- Overall Length - Fractional: 4-1/4 in
- Series: HY-PRO® NRT® 14001
- Shank Diameter - Decimal: 0.59 in
- Square Size: 0.689 in L x 0.442 in W
- Thread Length: 1.201 in
- Thread Limit: H7
- Type: Forming
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Forming taps work by compressing the work material
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
OSG Thread Forming Tap | Performance | Series: HY-PRO NRT 14001 | Measurement System: Imperial | 3/4-10 | UNC | 2.5P Bottoming Chamfer | 1.201 in Thread Length | 4-1/4 in Overall Length | Right Hand Cutting | Class of Fit: 3B | 0.59 in Shank Dia | 0.699 to 0.7092 in Tap Drill | 0.689 in L x 0.442 in W Square Size | HSS-Co | Steam Oxide | H7 Thread Limit