OSG 1405000908 EXOTAP® NRT® 14050 High Performance Thread Forming Tap, #2-56 Thread, H3 Thread Limit
- Thread Size: #2-56
- Overall Length: 1.75 in
- Thread Standard: UNC
- Finish/Coating: V-Coated
- Material: VC-10
- Chamfer Type: 1.5P Short Bottoming
- Class of Fit: 2B
- Cutting Direction: Right Hand
- Measurement System: Imperial
- Overall Length - Fractional: 1-3/4 in
- Series: EXOTAP® NRT® 14050
- Shank Diameter - Decimal: 0.141 in
- Square Size: 0.189 in L x 0.11 in W
- Thread Length: 0.451 in
- Thread Limit: H3
- Type: Forming
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Forming taps work by compressing the work material
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
OSG Thread Forming Tap | High Performance | Series: EXOTAP NRT 14050 | Measurement System: Imperial | #2-56 | UNC | 1.5P Short Bottoming Chamfer | 0.451 in Thread Length | 1-3/4 in Overall Length | Right Hand Cutting | Class of Fit: 2B | 0.141 in Shank Dia | 0.0769 to 0.0787 in Tap Drill | 0.189 in L x 0.11 in W Square Size | VC-10 | V-Coated | H3 Thread Limit