OSG 1432100 107 General Purpose Spiral Flute Tap, Right Hand Cutting Direction, 1/2-13 Thread, H3 Thread Limit, 1.5P-2P Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, Bright, HSS
- Coolant Through: No
- Thread Size: 1/2-13
- Material: HSS
- Finish/Coating: Bright
- Number of Flutes: 3
- Flute Direction: Right Hand
- Thread Limit: H3
- Chamfer Type: 1.5P-2P Bottoming
- Cutting Direction: Right Hand
- Flute Type: Spiral
- Material Application: Ferrous and Non-Ferrous Metals
- Measurement System: Imperial
- Overall Length - Decimal: 3.37 mm
- Series: 107
- Shank Diameter - Decimal: 0.367 in
- Thread Length: 0.96 in
- Thread Standard: UNC
- Overall Length: 3.375 in
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Spiral flute taps utilize a helical flute
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
For blind hole applications
OSG Spiral Flute Tap | General Purpose | Series: 107 | Measurement System: Imperial | UNC | 1/2-13 | 1.5P-2P Bottoming Chamfer | 3 Flutes | HSS | Bright | Right Hand Cutting | 0.96 in Thread Length | 3.37 in Overall Length | 0.367 in Shank Dia | Right Hand Flute Direction | H3 Thread Limit | Ferrous and Non-Ferrous Metals Material Application | No Through Coolant (Yes/No)