OSG 2930008 HY-PRO® 290 Spiral Flute Tap, Right Hand Cutting Direction, 1/4-20 Thread, H3 Thread Limit, 2.5P-3P Modified Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-E
- Coolant Through: No
- Thread Size: 1/4-20
- Material: HSS-E
- Finish/Coating: TiCN Coated
- Number of Flutes: 3
- Flute Direction: Right Hand
- Thread Limit: H3
- Chamfer Type: 2.5P-3P Modified Bottoming
- Cutting Direction: Right Hand
- Material Application: Steel, Stainless Steel, Aluminum and Heat-Resistant Alloys
- Measurement System: Imperial
- Overall Length - Fractional: 2-1/2 in
- Series: HY-PRO® 290
- Shank Diameter - Decimal: 0.255 in
- Thread Length: 0.397 in
- Thread Standard: UNC
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Spiral flute taps utilize a helical flute
- The original Do It All spiral flute tap, good for all materials
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
For blind hole applications
OSG Spiral Flute Tap | Series: HY-PRO 290 | Measurement System: Imperial | UNC | 1/4-20 | 2.5P-3P Modified Bottoming Chamfer | 3 Flutes | HSS-E | TiCN Coated | Right Hand Cutting | 0.397 in Thread Length | 2-1/2 in Overall Length | 0.255 in Shank Dia | Right Hand Flute Direction | H3 Thread Limit | Steel | Stainless Steel | Aluminum and Heat-Resistant Alloys Material Application | No Through Coolant (Yes/No)