OSG 2953800 HY-PRO® AL 295 High Performance Spiral Flute Tap, Right Hand Cutting Direction, #10-24 Thread, H3 Thread Limit, 2.5P-3P Modified Bottoming Chamfer, Right Hand Flute Direction, 2 Flutes, Bright, HSS-E
- Coolant Through: No
- Thread Size: #10-24
- Material: HSS-E
- Finish/Coating: Bright
- Number of Flutes: 2
- Flute Direction: Right Hand
- Thread Limit: H3
- Chamfer Type: 2.5P-3P Modified Bottoming
- Cutting Direction: Right Hand
- Finish: Bright
- Material Application: Ferrous and Non-Ferrous Metals
- Measurement System: Imperial
- Overall Length - Decimal: 2.37 mm
- Series: HY-PRO® AL 295
- Thread Length: 0.326 in
- Thread Standard: UNC
- Overall Length: 2.375 in
- Flute Type: Spiral
- Shank Diameter - Decimal: 0.194 in
Taps are used to cut screw threads on the inside surfaces of holes, creating the female half (nut) of the screw. High precision is of vital importance, particularly in areas such as automobile engines, which require precision screws. OSG offers a lineup of taps with diameters in various sizes and with specifications suitable for a wide variety of uses.
- Spiral flute taps utilize a helical flute
- HSS-E material increased wear-resistance
- Slow spiral efficient chip evacuation
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
For blind hole applications
OSG Spiral Flute Tap | High Performance | Series: HY-PRO AL 295 | Measurement System: Imperial | UNC | #10-24 | 2.5P-3P Modified Bottoming Chamfer | 2 Flutes | HSS-E | Bright | Right Hand Cutting | 0.326 in Thread Length | 2.37 in Overall Length | 0.194 in Shank Dia | Right Hand Flute Direction | H3 Thread Limit | Ferrous and Non-Ferrous Metals Material Application | No Through Coolant (Yes/No)