Tiger 58011 Flat High Performance Fast Cut and Long Life Cutting Wheel, 3 in Dia x 0.035 in THK, 3/8 in Center Hole, 60 Grit, Zirconia Alumina Abrasive

Tiger® Zirc® 3 in type 1 cutting wheels cut faster and last longer so you get proven productivity at an exceptional total cost. The self-sharpening zirconia alumina grains retain a high cut rate throughout the life of the wheel while a hard bond delivers long wheel life for heavy duty applications. The flat type 1 profile allows for deep cuts commonly required when cutting metal. The 0.035 in wheel thickness is ideal for cutting tubes, bar stock, and large cross-sections with a die grinder. The 3/8 in open arbor offers a cost-effective mounting option when using adapting nuts. These wheels are designed for hardcore metal fabrication professionals who need a high performance solution when cutting steel, structural steel, and iron.

• Self-sharpening zirconia alumina grain retains high cutting performance throughout the life of the wheel
• Long wheel life on heavy duty applications
• Dual reinforcement provides added strength for aggressive cutting
• Smooth outer layer reduces friction that translates to an effortless cut and less kickback during operation
• Thin cutting wheels deliver accurate, clean cuts
• Open arbor offers a cost-effective mounting option when using adapting nuts

Tiger Cutting Wheel| Flat High Performance Fast Cut and Long Life| 3 in Wheel Dia| 0.035 in Wheel Thickness| 3/8 in Center Hole| 60 Grit| Fine Grade| Zirconia Alumina Abrasive| 25000 rpm Maximum| Resin Bond| Applicable Materials: Iron| Stainless Steel| Steel and Structural Steel| Wheel Type Number: Type 1| Wheel Hardness: T| For Use With: Die Grinder| Right Angle Air Die Grinder| Mandrel| Yes Reinforced| ANSI B7.1 Specifications Met