OSG 3195530 6 mm Dia, 4.5 mm LOC, 70 mm OAL, 3 Flutes, Carbide, WXS® Coated, Ball End Mill
OSG 3195530
$146.55
/ EA
Out of Stock
- Mill Diameter: 6 mm
- Mill Diameter - Decimal: 0.2362 in
- Mill Diameter - Metric: 6 mm
- Number of Flutes: 2
- Length of Cut: 4.5 mm
- Material: Carbide
- Overall Length: 70 mm
- Shank Diameter: 6 mm
- Shank Diameter - Decimal: 0.2362 in
- Shank Diameter - Metric: 6 mm
- Finish/Coating: WXL®
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 6 mm
- Cutter Diameter - Metric: 6 mm
- Cutting Direction: Right Hand
- Diameter: 0.23622 in
- Diameter - Decimal: 0.23622 in
- Diameter - Metric: 6 mm
- End Type: Ball Nose
- Extended Reach: Yes
- Finish: WXS® Coated
- Length of Cut - Decimal: 0.1772 in
- Length of Cut - Metric: 4.5 mm
- Neck Diameter: 0.2303 in
- Neck Diameter - Decimal: 0.2303 in
- Neck Diameter - Metric: 5.85 mm
- Neck Length: 30 mm
- Overall Length - Metric: 70 mm
- Reach Length: 1.1811 in
- Series: 9590
- Shank Length - Metric: 40 mm
- Shank Type: Shrink Fit
- Flute Type: Spiral
- Type: Center Cutting
The Exopro® Phx End Mill Series Is Designed Exclusively For Mold Makers, To Help Them Realize Greater Cost Savings And Shorter Delivery Times With Their Existing Equipment. New Spiral Gash Geometry Is Combined With Radial Chip Thinning Principles To Create End Mills Capable Of Taking Deeper Depths Of Cut With Length To Diameter Ratio'S Previously Thought Impractical.
- Spiral Gash Geometry Increases Edge Strength And Reduces Chip Thickness. Osg'S Wxs Nano Coating - Boasts The Absolute Highest Hardness And Heat Resistance Of Any Osg Coating. Available In A Wide Variety Of Shapes And Lengths- To Reach Any Mold Cavity Or Core.
Osg 3195530 Mill Diameter 0.2362 In | Number Of Flutes 3 | Length Of Cut 4.50 Mm | Solid Carbide | 70 Mm | Ball End Mill