OSG 412-0938-BN 3/32 in Mill Dia, 3/16 in LOC, 1-1/2 in OAL, 2 Flutes, Carbide, Bright, Ball End Mill
- Mill Diameter: 0.0938 in
- Mill Diameter - Decimal: 0.0938 in
- Mill Diameter - Fractional: 3/32 in
- Number of Flutes: 2
- Length of Cut: 0.1875 in
- Material: Carbide
- Overall Length: 1.5 in
- Shank Diameter: 0.125 in
- Shank Diameter - Decimal: 0.125 in
- Shank Diameter - Fractional: 1/8 in
- Shank Diameter - Metric: 3.175 mm
- Finish/Coating: Uncoated
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 3/32 in
- Cutter Diameter - Fractional: 3/32 in
- Cutting Direction: Right Hand
- Diameter: 3/32 in
- Diameter - Decimal: 0.09375 in
- Diameter - Fractional: 3/32 in
- End Type: Ball Nose
- Finish: Bright
- Length of Cut - Decimal: 0.1875 in
- Length of Cut - Fractional: 3/16 in
- Length Type: Stub Length
- Overall Length - Decimal: 1.5 in
- Overall Length - Fractional: 1-1/2 in
- Series: 412BN
- Shank Type: Straight
- Flute Type: Spiral
- Diameter - Metric: 2.381 mm
- Flute Direction: Right Hand
End mills are used to cut and contour molds for plastic parts, which include electric home appliances, die casting dies for automotive parts and stamping molds. To meet today's demanding requirements (smaller size, lower weight and reduced cost), OSG has developed many carbide end mills that are excellent in both processing accuracy and durability.
- Ball nose end mills featuring a full radius are ideally suited for milling 3-D contoured parts
Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
General Milling Applications
OSG End Mill | Ball Nose Center Cutting Regular Length Single End Standard | Series: 412BN | 3/32 in Cutter Dia | 1-1/2 in Overall Length | 3/16 in Maximum Depth of Cut | 2 Flutes | Spiral Flute | 1/8 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Straight Shank | Carbide | Bright