OSG

OSG 44301611 1/2 in Mill Dia, 7/8 in LOC, 4-3/8 in OAL, 4 Flutes, Micrograin Carbide, WXS® Coated, Ball End Mill

OSG 44301611
$278.90 / EA
Product Image
  • Mill Diameter: 0.5 in
  • Mill Diameter - Decimal: 0.5 in
  • Mill Diameter - Fractional: 1/2 in
  • Mill Diameter - Metric: 12.7 mm
  • Number of Flutes: 2
  • Length of Cut: 0.875 in
  • Material: Carbide
  • Overall Length: 4.375 in
  • Shank Diameter: 0.5 in
  • Shank Diameter - Decimal: 0.5 in
  • Shank Diameter - Fractional: 1/2 in
  • Shank Diameter - Metric: 12.7 mm
  • Finish/Coating: WXS
  • Single or Double End: Single End
  • Helix Angle: 30 deg
  • Centercutting: Center Cutting
  • Coolant Through: No
  • Cutter Diameter: 1/2 in
  • Cutter Diameter - Fractional: 1/2 in
  • Cutting Direction: Right Hand
  • Diameter: 1/2 in
  • End Type: Ball Nose
  • Finish: WXS® Coated
  • Length of Cut - Decimal: 0.875 in
  • Length of Cut - Fractional: 7/8 in
  • Overall Length - Decimal: 4.375 in
  • Overall Length - Fractional: 4-3/8 in
  • Series: 4430
  • Shank Type: Shrink Fit
  • Type: Center Cutting
  • Flute Type: Spiral
  • Diameter - Fractional: 1/2 in
  • Diameter - Metric: 12.7 mm
  • Diameter - Decimal: 0.5 in
  • Flute Direction: Right Hand

Exocarb®-Wxs End Mills Are The New Industry Standard For Hard Milling. Everything About Wxs Is Designed For Rigidity And Performance In Hardened Steel 50 Hrc And Greater. Substrates, Geometry, And Proprietary Wxs Coating Are All Specifically Tailored For Hardened Steels Like D2, A2, S7, H13 And Cpm.

  • Ultra-Fine Micrograin Carbide The Hardest Most Wear Resistant Carbide Possible For Incredible Wear Resistance
  • High Precision Geometry - All Corner Radius & Ball Mills Have +/-5Um Radius Tolerance High Accuracy All But Eliminates Need For Benching And Rework For Mold Makers
  • High Strength Core Diameter Tools Utilize Thicker Core Diameters For The Ultimate In Strength And Rigidity
  • Wxs Coating - +1300 Celsius Oxidation Temp. & +3500Hv In Hardness Higher Coating Oxidation Temp & Hardness Dramatically Improve Wear Resistance.

Application:Ideally Suited For Hardened Steel > 50 Hrc.Also Works In: Cast Iron, Carbon Steel, Alloy Steel, Die Steel, Hardened Steel 35-50 Hrc.Use In Combination With High Speed Machining Techniques To Optimize Performance.

Osg 44301611 Mill Diameter 1/2 In | Number Of Flutes 4 | Length Of Cut 7/8 In | Carbide | 4-3/8 In | Ball End Mill

QTY
Add to List