OSG

OSG 5717800 5/32 in Mill Dia, 7/16 in LOC, 2-1/4 in OAL, 2 Flutes, HSS-CO, Bright, Ball End Mill

OSG 5717800
$64.29 / EA
  • Mill Diameter: 3.97 mm
  • Mill Diameter - Decimal: 0.1563 in
  • Mill Diameter - Fractional: 5/32 in
  • Mill Diameter - Metric: 3.97 mm
  • Number of Flutes: 2
  • Length of Cut: 0.4375 in
  • Material: HSS-CO
  • Overall Length: 2.25 in
  • Shank Diameter: 0.1875 in
  • Shank Diameter - Decimal: 0.1875 in
  • Shank Diameter - Fractional: 3/16 in
  • Shank Diameter - Metric: 4.7625 mm
  • Finish/Coating: Uncoated
  • Single or Double End: Double End
  • Helix Angle: 30 deg
  • Centercutting: Center Cutting
  • Coolant Through: No
  • Cutter Diameter: 5/32 in
  • Cutter Diameter - Fractional: 5/32 in
  • Cutting Direction: Right Hand
  • Diameter: 5/32 in
  • Diameter - Decimal: 0.15625 in
  • Finish: Bright
  • Length of Cut - Decimal: 0.4375 in
  • Length of Cut - Fractional: 7/16 in
  • Length of Cut - Metric: 11.1125 mm
  • Overall Length - Decimal: 2.25 in
  • Overall Length - Fractional: 2-1/4 in
  • Series: 571
  • Shank Type: Weldon Flat
  • Flute Type: Spiral
  • Diameter - Fractional: 5/32 in
  • Diameter - Metric: 3.968 mm
  • Flute Direction: Right Hand

The Standard Carbide End Mill Lineup Consists Of A Variety Of Different End Mill Designs, Made To Osg Quality Standards At A Value-Added Price Point That Is Friendly To Any Tooling Budget. An Economical Solution Without Sacrificing Consistent Tolerancing And Precision.

  • Uncoated Tools Do Not Feature Supportive Treatments On The Cutting Edge
  • Cobalt Is Harder Than High Speed Steel And Provides Better Wear Resistance

Application:Cast Iron, Carbon Steels, Alloy Steel, Die Steel, Stainless Steel, Hardened Steel < 45 Hrc.They Are Are Used At Reduced Speeds For General Applications On Nonferrous Metals.T Is Commonly Used On High Tensile Alloys.

Osg 5717800 Mill Diameter 5/32 In | Number Of Flutes 2 | Length Of Cut 7/16 In | Cobalt | 2-1/4 In | Ball End Mill

QTY