OSG HP418-3750 3/8 in Mill Dia, 0.6 in LOC, 4 in OAL, 2 Flutes, Sub-Micrograin Carbide, TiAlN Coated, Ball End Mill
OSG HP418-3750
$205.79
/ EA
- Mill Diameter: 0.375 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Number of Flutes: 2
- Length of Cut: 0.6 in
- Material: Carbide
- Overall Length: 4 in
- Shank Diameter: 0.5 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Finish/Coating: TiAlN
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 3/8 in
- Cutter Diameter - Fractional: 3/8 in
- Cutting Direction: Right Hand
- Diameter: 3/8 in
- End Type: Ball Nose
- Finish: TiAlN Coated
- Length of Cut - Decimal: 0.6 in
- Length of Cut - Metric: 15.24 mm
- Neck Diameter: 1/2 in
- Neck Diameter - Decimal: 0.5000 in
- Neck Diameter - Fractional: 1/2 in
- Neck Diameter - Metric: 12.70 mm
- Neck Length: 2.25 in
- Non-Taper Neck Length: 0.75 in
- Overall Length - Decimal: 4 in
- Series: HP418
- Shank Type: Shrink Fit
- Taper Angle: 2 deg
- Type: Center Cutting
- Flute Type: Spiral
- Diameter - Fractional: 3/8 in
- Diameter - Metric: 9.525 mm
- Diameter - Decimal: 0.375 in
- Flute Direction: Right Hand
The Hy-Pro®-Carb Is An Entire Line Up Of Performance End Mills Designed For Extend Tool Life.
- Titanium Aluminum Nitride (Tialn) Has A Higher Hardness And Oxidation Temperature Versus Tin And Ticn. As A Result,
Application:Cast Iron, Carbon Steels, Alloy Steel, Die Steel, Stainless Steel, Hardened Steel < 45 Hrc.It Is Particularly Advantageous For Higher Speed Operations In A Variety Of Steel Machining Applications.
Osg Hp418-3750 Mill Diameter 3/8 In | Number Of Flutes 2 | Length Of Cut 0.6 In | Solid Carbide | 4.0000 In | Ball End Mill