EM 5/16X13/16X4 4F BN CARBIDE TX
- Mill Diameter: 0.3125 in
- Mill Diameter - Decimal: 0.3125 in
- Mill Diameter - Fractional: 5/16 in
- Mill Diameter - Metric: 7.94 mm
- Number of Flutes: 4
- Length of Cut: 0.812 in
- Material: Carbide
- Overall Length: 4 in
- Shank Diameter: 0.3125 in
- Shank Diameter - Decimal: 0.3125 in
- Shank Diameter - Fractional: 5/16 in
- Shank Diameter - Metric: 7.94 mm
- Finish/Coating: TX
- Single or Double End: Single End
- Helix Angle: 35 - 38 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutting Direction: Right Hand
- Extended Reach: No
- Length of Cut - Decimal: 0.812 in
- Length of Cut - Fractional: 13/16 in
- Length of Cut - Metric: 20.62 mm
- Overall Length - Decimal: 4 in
- Overall Length - Metric: 101.6 mm
- Flute Direction: Right Hand
The Z-Carb-AP offers performance so advanced, it goes way beyond typical high performance carbide end mills. With most 4-flute end mills, the cutting teeth enter and exit the material creating a natural rhythm that results in damaging harmonics. The harmonics produce a frequency that resonates through the entire end mill, resulting in chatter. With its patented, one of a kind geometry, the Z-Carb-AP offers three stages of chatter suppression.
- Superior chatter suppression through advanced patented design
- Increase productivity by cutting deeper and wider without harmful harmonics
- Lower cutting forces for dramatically longer tool life
- External coolant
- Flute spacing unequal
- Patented variable rake
- 1-5/8 in reach
- Applicable materials: steels, stainless steels, cast iron, high temp alloys, titanium, non-ferrous, plastic/composites and hardened steels
- +0.0000/-0.0016 in D1, H6 D2 tolerances
Application: Aerospace, Medical, Power Generation, Automotive, Mold and Die, Castings and Foundries, General Engineering
SGS® High Performance End Mill | Ball End Long Reach Neck Variable Geometry | Series: Z-Carb™-AP | Z1PLB | 5/16 in Cutter Dia | 4 in Overall Length | 13/16 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 5/16 in Shank Dia | Right Hand Cutting | 35 to 38 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | TX Coated