SGS 70445 7B Ball Nose End Fractional High Performance High Performance End Mill, 3/16 in Dia Cutter, 1-1/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 3 in OAL, TX Coated
SGS 70445
$48.22
/ EA
Out of Stock
- Mill Diameter: 0.187 in
- Mill Diameter - Decimal: 0.187 in
- Mill Diameter - Fractional: 3/16 in
- Mill Diameter - Metric: 4.75 mm
- Number of Flutes: 4
- Length of Cut: 1.125 in
- Material: Carbide
- Overall Length: 3 in
- Shank Diameter: 0.187 in
- Shank Diameter - Decimal: 0.187 in
- Shank Diameter - Fractional: 3/16 in
- Shank Diameter - Metric: 4.75 mm
- Finish/Coating: TX
- Single or Double End: Single End
- Helix Angle: 38 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 3/16 in
- Cutter Diameter - Fractional: 3/16 in
- Cutting Direction: Right Hand
- Extended Reach: No
- Flute Type: Spiral
- Length of Cut - Decimal: 1.125 in
- Length of Cut - Fractional: 1-1/8 in
- Length of Cut - Metric: 28.58 mm
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 76.2 mm
- Series: 7B
- Shank Length: 1-7/8 in
- Shank Length - Fractional: 1-7/8 in
- Shank Type: Straight
- Type: Ball Nose End Fractional High Performance
- Flute Direction: Right Hand
The series 7 end mill provides precision performance and high production rates without chatter. This is the tool that can deliver it all in long lengths of cut: chatter suppression, longer tool life, better surface finishes, reduced harmonics and improved side-wall straightness.
- Variable pitch fluting geometry suppresses chatter and produces better surface finishes
- Rigid construction minimizes deflection and increases part accuracy
- Optimized tool geometry increases tool life while strengthening all cutting edges
- Positive rake angle
- External coolant
- Flute spacing unequal
- Applicable materials: steels, stainless steels, cast iron, high temp alloys and titanium
- +0.000/-0.002 in D1, H6 D2 tolerences
Application: Aerospace, Medical, Power Generation, Automotive, Castings, Foundries, General Engineering, Mold and Die
SGS® High Performance End Mill | Ball End Extra Long Length Variable Geometry | Series: 7B | 3/16 in Cutter Dia | 3 in Overall Length | 1-1/8 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 3/16 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | AlTiN Coated