SGS 70460 1/2 in Mill Dia, 3 in LOC, 6 in OAL, 4 Flutes, Micrograin Solid Carbide, TX Coated, Ball End Mill
SGS 70460
$316.83
/ EA
- Mill Diameter: 0.5 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Number of Flutes: 4
- Length of Cut: 3 in
- Material: Carbide
- Overall Length: 6 in
- Shank Diameter: 0.5 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Finish/Coating: TX
- Single or Double End: Single End
- Helix Angle: 38 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutting Direction: Right Hand
- Extended Reach: No
- Length of Cut - Decimal: 3 in
- Overall Length - Decimal: 6 in
- Overall Length - Metric: 152.4 mm
- Flute Direction: Right Hand
The series 7 end mill provides precision performance and high production rates without chatter. This is the tool that can deliver it all in long lengths of cut: chatter suppression, longer tool life, better surface finishes, reduced harmonics and improved side-wall straightness.
- Variable pitch fluting geometry suppresses chatter and produces better surface finishes
- Rigid construction minimizes deflection and increases part accuracy
- Optimized tool geometry increases tool life while strengthening all cutting edges
- Positive rake angle
- External coolant
- Flute spacing unequal
- Applicable materials: steels, stainless steels, cast iron, high temp alloys and titanium
- +0.000/-0.002 in D1, H6 D2 tolerences
Application: Aerospace, Medical, Power Generation, Automotive, Castings, Foundries, General Engineering, Mold and Die
SGS® High Performance End Mill | Ball End Extra Long Length Variable Geometry | Series: 7B | 1/2 in Cutter Dia | 6 in Overall Length | 3 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | AlTiN Coated