SGS 93276 56B Ball Nose End Fractional High Performance End Mill, 3/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 3 in OAL, TX Coated
- Mill Diameter: 0.187 in
- Mill Diameter - Decimal: 0.187 in
- Mill Diameter - Fractional: 3/16 in
- Mill Diameter - Metric: 4.75 mm
- Number of Flutes: 2
- Length of Cut: 0.187 in
- Material: Carbide
- Overall Length: 3 in
- Shank Diameter: 0.125 in
- Shank Diameter - Decimal: 0.125 in
- Shank Diameter - Fractional: 1/8 in
- Shank Diameter - Metric: 3.175 mm
- Finish/Coating: TX
- Single or Double End: Single End
- Helix Angle: 30 deg
- Centercutting: Center Cutting
- Coolant Through: No
- Cutter Diameter: 3/16 in
- Cutting Direction: Right Hand
- Extended Reach: Yes
- Length of Cut - Decimal: 0.187 in
- Length of Cut - Fractional: 3/16 in
- Length of Cut - Metric: 4.75 mm
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 76.2 mm
- Series: 56B
- Shank Length: 2.813 in
- Shank Type: Straight
- Type: Ball Nose End Fractional
- Flute Type: Spiral
- Cutter Diameter - Fractional: 3/16 in
- Flute Direction: Right Hand
Designed for high speed roughing and finishing of complex contoured shapes in hardened materials. The Turbo Carb end mill is made of an application specific carbide to improve wear resistance and toughness in demanding applications. The high performance S-Gash geometry on the ball improves shearing while reducing the load. Ideal for dry machining with the exclusive Ti-NAMITE A tool coating.
- Solid carbide provides better rigidity than high speed steel
- It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials
- Short flute length and rigid design to reduce deflection
- S-Gash ball geometry minimizes load and heat produced during cut, while increasing tool life
- Application specific carbide to handle heat during dry machining and increase rigidit
- Negative rake angle
- External coolant
- Applicable materials: steels and hardened steels
- +0.0000/-0.0012 in D1, H6 D2 tolerances
Application: Power Generation, Automotive, General Engineering, Mold and Die
SGS® High Performance End Mill | Ball End Contouring End Long Length Single End | Series: Turbo-Carb | 56B | 3/16 in Cutter Dia | 3 in Overall Length | 3/16 in Maximum Depth of Cut | 2 Flutes | Spiral Flute | 1/4 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Straight Shank | Micrograin Solid Carbide | AlTiN Coated