Emuge 1828A.0500 Square End Mills 1/2in Milling Dia, 1-1/2in LOC, 3-3/4in OAL, 6 Flutes, Carbide
EMUGE 1828A.0500
$274.22
/ EA
Out of Stock
- Mill Diameter: 0.5 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Chamfer Length: 0.005 in
- Number of Flutes: 6
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 1.5 in
- Shank Diameter: 0.5 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Overall Length: 3.75 in
- Centercutting: No Center Cutting
- Helix Angle: 50 deg
- Coolant Through: No
- Cutter Diameter: 1/2 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- End Type: Square
- Extended Reach: No
- Length of Cut - Decimal: 1.5 in
- Length of Cut - Fractional: 1-1/2 in
- Length of Cut - Metric: 38.1 mm
- Length Type: Long Length
- Overall Length - Decimal: 3.75 in
- Overall Length - Fractional: 3-3/4 in
- Overall Length - Metric: 95.25 mm
- Series: Hard-Cut 1828A
- Shank Type: Cylindrical
- Single or Double End: Single End
- Type: Hard Cut
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1/2 in
- Diameter - Fractional: 1/2 in
- Diameter - Metric: 12.7 mm
- Flute Direction: Right Hand
- Hard-Cut series of carbide end mills is specifically developed for machining hardened materials (up to 66 Rc)
- Well suited for the die and mold industry and are manufactured with extremely tight tolerances
- Multi-flute - 6, 8 and 10 flute construction for hard milling
- Premium sub-micro grain carbide substrate
- TiAlN coated for heat and wear resistance
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For roughing applications
Emuge Square End Mill | Extra Length | Series: Hard-Cut 1828A | 1/2 in Cutter Dia | 3-3/4 in Overall Length | 1-1/2 in Maximum Depth of Cut | 6 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 50 deg Helix Angle | Cylindrical Shank | Carbide | TiAlN Coated