Emuge 2875A.01875 Square End Mills 3/16in Milling Dia, 9/32in LOC, 3in OAL, 3 Flutes, Carbide
EMUGE 2875A.01875
$166.49
/ EA
Out of Stock
- Mill Diameter: 0.1875 in
- Mill Diameter - Decimal: 0.1875 in
- Mill Diameter - Fractional: 3/16 in
- Mill Diameter - Metric: 4.7625 mm
- Number of Flutes: 3
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 9/32 in
- Shank Diameter: 0.1875 in
- Shank Diameter - Decimal: 0.1875 in
- Shank Diameter - Fractional: 3/16 in
- Shank Diameter - Metric: 4.7625 mm
- Overall Length: 3 in
- Centercutting: Center Cutting
- Helix Angle: 45 deg
- Coolant Through: No
- Cutter Diameter: 3/16 in
- Cutter Diameter - Fractional: 3/16 in
- Cutting Direction: Right Hand
- Diameter: 3/16 in
- Diameter - Fractional: 3/16 in
- Extended Reach: Yes
- Finish: TiAlN Coated
- Length of Cut - Decimal: 0.2813 in
- Length of Cut - Fractional: 9/32 in
- Length of Cut - Metric: 7.1438 mm
- Length Type: Extra Long Length
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 76.2 mm
- Series: Multi-Cut 2875A
- Single or Double End: Single End
- Type: High Performance
- Flute Type: Spiral
- Diameter - Decimal: 0.1875 in
- Shank Type: Weldon Flat
- Diameter - Metric: 4.762 mm
- Flute Direction: Right Hand
- Vibration dampening variable flute spacing
- Short flute length with an aggressive 45 deg helix angle
- NR fine roughing flute profile helps reduce vibrations and cutting force for optimum performance
- PVD applied TiAlN coated for wear and heat resistance
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For high performance roughing operations and maximum metal removal rates
Emuge Square End Mill | Extra Length | Series: Multi-Cut 2875A | 3/16 in Cutter Dia | 3 in Overall Length | 9/32 in Maximum Depth of Cut | 3 Flutes | Spiral Flute | 3/16 in Shank Dia | Right Hand Cutting | 45 deg Helix Angle | Weld-On Flat Shank | Carbide | TiAlN Coated