Niagara Cutter 17010853 REM445 Extended Reach Non-Center Cutting Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 3-1/8 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 5-1/4 in OAL, Uncoated
NIACUT 17010853
$109.01
/ EA
Out of Stock
- Mill Diameter: 5/8 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.87 mm
- Pitch: Fine
- Length of Cut: 3-1/8 in
- Shank Diameter: 5/8 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- End Type: Square End
- Material: HSS-Co8
- Finish/Coating: Bright / Uncoated
- Overall Length: 5-1/4 in
- Centercutting: Center Cutting
- Helix Angle: 30 deg
- Chamfer Width: 0.03 in
- Chamfer Width - Decimal: 0.03 in
- Chipbreaker: No
- Corner Radius: 0.03 in
- Cutter Diameter: 5/8 in
- Cutter Diameter - Fractional: 5/8 in
- Cutting Direction: Right Hand
- Diameter: 5/8 in
- Diameter - Fractional: 5/8 in
- Diameter - Metric: 15.87 mm
- Length of Cut - Decimal: 3.125 in
- Length of Cut - Fractional: 3-1/8 in
- Length of Cut - Metric: 79.375 mm
- Number of Flutes: 4
- Overall Length - Decimal: 5.25 in
- Overall Length - Fractional: 5-1/4 in
- Overall Length - Metric: 133.35 mm
- Single or Double End: Single End
- Variable Helix: No
- Flute Type: Spiral
- Shank Type: Weldon Flat
- Flute Direction: Right Hand
- Variable Index: No
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Extended Reach Non-Center Cutting Single End | Series: REM445 | 5/8 in Cutter Dia | 0.03 in Corner Radius | 5-1/4 in Overall Length | 3-1/8 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 5/8 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: REM445-0.625-D6-C030.3-Z4 | ISO Code: REM445.625D6C030.3Z4 | M42 HSS-Co 8 | Uncoated