Niagara Cutter 17012289 EXR350 Center Cutting Medium Length Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-3/4 in OAL, TiCN Coated
NIACUT 17012289
$119.15
/ EA
Out of Stock
- Mill Diameter: 5/8 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.87 mm
- Length of Cut: 1-5/8 in
- Shank Diameter: 5/8 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- Material: HSS-Co8
- Finish/Coating: TiCN
- Overall Length: 3-3/4 in
- Centercutting: Center Cutting
- Helix Angle: 35 deg
- Chamfer Width: 0.03 in
- Chamfer Width - Decimal: 0.03 in
- Chipbreaker: No
- Corner Radius: 0.03 in
- Cutter Diameter: 5/8 in
- Cutting Direction: Right Hand
- Length of Cut - Decimal: 1.625 in
- Length of Cut - Fractional: 1-5/8 in
- Length of Cut - Metric: 41.275 mm
- Overall Length - Decimal: 3.75 in
- Overall Length - Fractional: 3-3/4 in
- Overall Length - Metric: 95.25 mm
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Variable Helix: No
- Flute Type: Spiral
- Cutter Diameter - Fractional: 5/8 in
- Number of Flutes: 4
- Flute Direction: Right Hand
- Variable Index: No
Slotting, Pocketing and Profiling
Niagara Cutter End Mill | Center Cutting Medium Length Single End | Series: EXR350 | 5/8 in Cutter Dia | 0.03 in Corner Radius | 3-3/4 in Overall Length | 1-5/8 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 5/8 in Shank Dia | Right Hand Cutting | 35 deg Helix Angle | Weldon Flat Shank | ANSI Code: EXR350-0.625-D3-C030.3-Z4 | ISO Code: EXR350.625D3C030.3Z4 | 8.5% Cobalt | TiCN Coated