Niagara Cutter 17015212 REM710 Non-Center Cutting Short Length Single End End Mill, 2 in Dia Cutter, 0.04 in Corner Radius, 1-1/8 in Length of Cut, 8 Flutes, 3/4 in Dia Shank, 3-3/8 in OAL, TiCN Coated
NIACUT 17015212
$309.27
/ EA
Out of Stock
- Mill Diameter: 2 in
- Mill Diameter - Decimal: 2 in
- Mill Diameter - Metric: 50.8 mm
- Pitch: Coarse
- Length of Cut: 1-1/8 in
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- End Type: Square End
- Material: HSS-Co8
- Finish/Coating: TiCN
- Overall Length: 3-3/8 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Chamfer Width: 0.04 in
- Chipbreaker: No
- Corner Radius: 0.04 in
- Cutter Diameter: 2 in
- Cutting Direction: Right Hand
- Diameter: 50.8 mm
- Diameter - Metric: 50.8 mm
- Flute Direction: Right Hand
- Length of Cut - Decimal: 1.125 in
- Length of Cut - Fractional: 1-1/8 in
- Length of Cut - Metric: 28.575 mm
- Overall Length - Decimal: 3.375 in
- Overall Length - Fractional: 3-3/8 in
- Overall Length - Metric: 85.725 mm
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Variable Helix: No
- Flute Type: Spiral
- Number of Flutes: 4
- Variable Index: No
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Non-Center Cutting Short Length Single End | Series: REM710 | 2 in Cutter Dia | 0.04 in Corner Radius | 3-3/8 in Overall Length | 1-1/8 in Maximum Depth of Cut | 8 Flutes | Spiral Flute | 3/4 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: REM710-2.000-P2-C040.3-Z8 | ISO Code: REM7102.000P2C040.3Z8 | M42 HSS-Co 8 | TiCN Coated