OSG 4550111 Fine Pitch, 1-1/4 in LOC, 4, Roughing End Mill
OSG 4550111
$120.86
/ EA
Out of Stock
- Mill Diameter: 1/2 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Pitch: Fine
- Length of Cut: 1-1/4 in
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- End Type: Square
- Finish/Coating: TiAlN
- Overall Length: 3-1/4 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Cutter Diameter: 1/2 in
- Cutting Direction: Right Hand
- Finish: TiAlN Coated
- Flute Type: Multiple
- Hole Diameter - Metric: 0.20 mm
- Included Angle: 55 deg
- Length of Cut - Decimal: 1.25 in
- Length of Cut - Fractional: 1-1/4 in
- Length of Cut - Metric: 31.75 mm
- Number of Flutes: 4
- Overall Length - Decimal: 3.25 in
- Overall Length - Fractional: 3-1/4 in
- Overall Length - Metric: 82.55 mm
- Relief Angle: 0 Degree
- Series: 455
- Cutter Diameter - Fractional: 1/2 in
- Shank Type: Weldon Flat
HSS-Co ROUGHING Cobalt-HSS Roughing Cut End Mills for Ferrous and Non-Ferrous Materials
- Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Application:Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
OSG 4550111 Fine Pitch | 1-1/4 in LOC | 4 | HSS-CO | Roughing End Mill