YG-1 61488CF E2171 Coarse Pitch Imperial Medium Length Single End Roughing End Mill, 2 in Dia Cutter, 6 in Length of Cut, 8 Flutes, 2 in Dia Shank, 9-3/4 in OAL, TiAlN Futura Coated
YG1 61488CF
$687.45
/ EA
Out of Stock
- Mill Diameter: 2 in
- Mill Diameter - Decimal: 2 in
- Mill Diameter - Metric: 50.8 mm
- Pitch: Coarse
- Length of Cut: 6 in
- Shank Diameter: 2 in
- Shank Diameter - Decimal: 2 in
- Shank Diameter - Metric: 50.8 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Futura Coated
- Overall Length: 9-3/4 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Length of Cut - Decimal: 6 in
- Length of Cut - Metric: 152.4 mm
- Number of Flutes: 8
- Overall Length - Decimal: 9.75 in
- Overall Length - Fractional: 9-3/4 in
- Overall Length - Metric: 247.65 mm
- Single or Double End: Single End
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials.
The end tooth of this tool has a center hole design for many accurate resharpenings between centers.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is recommended for cutting steel grades and many non-ferrous materials.
The end tooth of this tool has a center hole design for many accurate resharpenings between centers.