YG-1 71394CC E2077 Long Length Rougher End Mill, 7/8 in Dia Cutter, 3-1/2 in Length of Cut, 5 Flutes, 7/8 in Dia Shank, 5-3/4 in OAL, TiCN Coated
YG1 71394CC
$198.96
/ EA
Out of Stock
- Mill Diameter: 7/8 in
- Mill Diameter - Decimal: 0.875 in
- Mill Diameter - Fractional: 7/8 in
- Mill Diameter - Metric: 22.22 mm
- Pitch: Fine
- Length of Cut: 3-1/2 in
- Shank Diameter: 7/8 in
- Shank Diameter - Decimal: 0.875 in
- Shank Diameter - Fractional: 7/8 in
- Shank Diameter - Metric: 22.225 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiCN-Coated
- Overall Length: 5-3/4 in
- Centercutting: Center Cutting
- Helix Angle: 30 deg
- Flute Type: Rougher
- Length of Cut - Decimal: 3.5 in
- Length of Cut - Fractional: 3-1/2 in
- Length of Cut - Metric: 88.9 mm
- Length Type: Long Length
- Number of Flutes: 5
- Overall Length - Decimal: 5.75 in
- Overall Length - Fractional: 5-3/4 in
- Overall Length - Metric: 146.05 mm
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.