YG-1 72297CF E2086 Center Cut Fine Pitch Imperial Stub Length Single End Roughing End Mill, 1/4 in Dia Cutter, 1/4 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 2-1/16 in OAL, TiAlN Futura Coated
YG1 72297CF
$50.82
/ EA
Out of Stock
- Mill Diameter: 1/4 in
- Mill Diameter - Decimal: 0.25 in
- Mill Diameter - Fractional: 1/4 in
- Mill Diameter - Metric: 6.35 mm
- Pitch: Fine
- Length of Cut: 1/4 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Futura Coated
- Overall Length: 2-1/16 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Diameter: 1/4 in
- Diameter - Fractional: 1/4 in
- Diameter - Metric: 6.35 mm
- Flute Size: 1/4 in
- Flute Type: Rougher
- Length of Cut - Decimal: 0.25 in
- Length of Cut - Fractional: 1/4 in
- Length of Cut - Metric: 6.35 mm
- Length Type: Stub Length
- Number of Flutes: 3
- Overall Length - Decimal: 2.0625 in
- Overall Length - Fractional: 2-1/16 in
- Overall Length - Metric: 52.3875 mm
- Shank Type: Flat
- Single or Double End: Single End
- Diameter - Decimal: 0.25 in
- Type: Center Cutting
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.