YG-1 72305CE E2086 Center Cut Fine Pitch Imperial Stub Length Single End Roughing End Mill, 3/8 in Dia Cutter, 3/8 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 2-5/32 in OAL, TiAlN Extreme Coated
YG1 72305CE
$51.91
/ EA
Out of Stock
- Mill Diameter: 3/8 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Mill Diameter - Metric: 9.525 mm
- Pitch: Fine
- Length of Cut: 3/8 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Extreme Coated
- Overall Length: 2-5/32 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Diameter: 3/8 in
- Flute Size: 3/8 in
- Flute Type: Rougher
- Length of Cut - Decimal: 0.375 in
- Length of Cut - Fractional: 3/8 in
- Length of Cut - Metric: 9.525 mm
- Length Type: Stub Length
- Number of Flutes: 3
- Overall Length - Decimal: 2.1563 in
- Overall Length - Fractional: 2-5/32 in
- Overall Length - Metric: 54.7688 mm
- Shank Type: Flat
- Single or Double End: Single End
- Type: Center Cutting
- Diameter - Fractional: 3/8 in
- Diameter - Metric: 9.525 mm
- Diameter - Decimal: 0.375 in
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.