YG-1 75305CF E2086 Center Cut Fine Pitch Imperial Stub Length Roughing End Mill, 3/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-5/32 in OAL, TiAlN Futura Coated
YG1 75305CF
$68.40
/ EA
- Mill Diameter: 3/8 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Mill Diameter - Metric: 9.525 mm
- Pitch: Fine
- Length of Cut: 3/8 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Futura Coated
- Overall Length: 2-5/32 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Diameter: 3/8 in
- Diameter - Fractional: 3/8 in
- Flute Size: 3/8 in
- Length of Cut - Decimal: 0.375 in
- Length of Cut - Fractional: 3/8 in
- Length of Cut - Metric: 9.525 mm
- Length Type: Stub Length
- Number of Flutes: 4
- Overall Length - Decimal: 2.1563 in
- Overall Length - Fractional: 2-5/32 in
- Overall Length - Metric: 54.7688 mm
- Shank Type: Flat
- Type: Center Cutting
- Diameter - Decimal: 0.375 in
- Diameter - Metric: 9.525 mm
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.