YG-1 75305CH E2086 Center Cut Fine Pitch Imperial Stub Length Roughing End Mill, 3/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-5/32 in OAL, Hardslick Coated
YG1 75305CH
$60.70
/ EA
Out of Stock
- Mill Diameter: 3/8 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Mill Diameter - Metric: 9.525 mm
- Pitch: Fine
- Length of Cut: 3/8 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, Hard Slick Coated
- Overall Length: 2-5/32 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Length of Cut - Decimal: 0.375 in
- Length of Cut - Fractional: 3/8 in
- Length of Cut - Metric: 9.525 mm
- Number of Flutes: 4
- Overall Length - Decimal: 2.1563 in
- Overall Length - Fractional: 2-5/32 in
- Overall Length - Metric: 54.7688 mm
- Flute Type: Spiral
4 Flute Stub Length Center Cut Fine Pitch Rougher Hardslick Coated 8% Cobalt
- This General Purpose Rougher Is Designed For High Production Metal Removal In A Wide Range Of Work Piece Material
- It Is Suitable For A Very Broad Spectrum Of Materials Having Up To High Tensile Strengths
- In Many Cases, The Milled Surfaces Are Of Acceptable Quality
Yg-1 Cutting Tools 75305Ch Mill Diameter 3/8 In | Number Of Flutes 4 | Length Of Cut 3/8 In | M42 HSS-Co 8 | Square End Mill