• Home
  • Products
  • Milling
  • End Mills
  • Roughing End Mills
  • YG-1 75359CH E2086 Center Cut Fine Pitch Imperial Stub Length Roughing End Mill, 3/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 2-7/8 in OAL, Hardslick Coated
YG-1 Cutting Tools

YG-1 75359CH E2086 Center Cut Fine Pitch Imperial Stub Length Roughing End Mill, 3/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 2-7/8 in OAL, Hardslick Coated

YG1 75359CH
$140.49 / EA
Out of Stock
Image for YG1 75359CH
  • Mill Diameter: 3/4 in
  • Mill Diameter - Decimal: 0.75 in
  • Mill Diameter - Fractional: 3/4 in
  • Mill Diameter - Metric: 19.05 mm
  • Pitch: Fine
  • Length of Cut: 3/4 in
  • Shank Diameter: 3/4 in
  • Shank Diameter - Decimal: 0.75 in
  • Shank Diameter - Fractional: 3/4 in
  • Shank Diameter - Metric: 19.05 mm
  • Material: Cobalt
  • Finish/Coating: 8% Cobalt, Hard Slick Coated
  • Overall Length: 2-7/8 in
  • Centercutting: Centercutting
  • Helix Angle: 30 deg
  • Flute Type: Rougher
  • Length of Cut - Decimal: 0.75 in
  • Length of Cut - Fractional: 3/4 in
  • Length of Cut - Metric: 19.05 mm
  • Overall Length - Decimal: 2.875 in
  • Overall Length - Fractional: 2-7/8 in
  • Overall Length - Metric: 73.025 mm
  • Number of Flutes: 4

4 Flute Stub Length Center Cut Fine Pitch Rougher Hardslick Coated 8% Cobalt

Application:

  • This general purpose rougher is designed for high production metal removal in a wide range of workpiece material
  • In many cases, the milled surfaces are of acceptable quality
  • It is suitable for a very broad spectrum of materials having up to high tensile strengths

    • YG-1 Cutting Tools 75359CH Mill Diameter 3/4 in | Number of Flutes 4 | Length of Cut 3/4 in | Cobalt | Hardslick Coated | Square End Mill

    QTY
    Add to List