YG-1 76312CE E2085 Center Cut Fine Pitch Imperial Regular Length Roughing End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-11/16 in OAL, TiAlN Extreme Coated
YG1 76312CE
$82.25
/ EA
Out of Stock
- Mill Diameter: 7/16 in
- Mill Diameter - Decimal: 0.4375 in
- Mill Diameter - Fractional: 7/16 in
- Mill Diameter - Metric: 11.11 mm
- Pitch: Fine
- Length of Cut: 1 in
- Shank Diameter: 3/8 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiAlN-Extreme Coated
- Overall Length: 11/16 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Diameter: 7/16 in
- Flute Size: 1 in
- Length of Cut - Decimal: 1 in
- Length of Cut - Metric: 25.4 mm
- Length Type: Regular
- Overall Length - Decimal: 2.6875 in
- Overall Length - Fractional: 2-11/16 in
- Overall Length - Metric: 68.2625 mm
- Shank Type: Flat
- Type: Center Cutting
- Flute Type: Spiral
- Diameter - Metric: 11.11 mm
- Diameter - Fractional: 7/16 in
- Diameter - Decimal: 0.4375 in
- Number of Flutes: 4
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.