YG-1 76394CC E2085 Center Cut Fine Pitch Imperial Regular Length Roughing End Mill, 7/8 in Dia Cutter, 1-7/8 in Length of Cut, 5 Flutes, 7/8 in Dia Shank, 4-1/8 in OAL, TiCN Coated
YG1 76394CC
$181.49
/ EA
Out of Stock
- Mill Diameter: 7/8 in
- Mill Diameter - Decimal: 0.875 in
- Mill Diameter - Fractional: 7/8 in
- Mill Diameter - Metric: 22.22 mm
- Pitch: Fine
- Length of Cut: 1-7/8 in
- Shank Diameter: 7/8 in
- Shank Diameter - Decimal: 0.875 in
- Shank Diameter - Fractional: 7/8 in
- Shank Diameter - Metric: 22.225 mm
- Material: Cobalt
- Finish/Coating: 8% Cobalt, TiCN-Coated
- Overall Length: 1/8 in
- Centercutting: Centercutting
- Helix Angle: 30 deg
- Diameter: 7/8 in
- Diameter - Decimal: 0.875 in
- Diameter - Metric: 22.22 mm
- Flute Size: 1-7/8 in
- Flute Type: Spiral
- Length of Cut - Decimal: 1.875 in
- Length of Cut - Fractional: 1-7/8 in
- Length of Cut - Metric: 47.625 mm
- Length Type: Regular
- Number of Flutes: 5
- Overall Length - Decimal: 4.125 in
- Overall Length - Fractional: 4-1/8 in
- Overall Length - Metric: 104.775 mm
- Shank Type: Flat
- Diameter - Fractional: 7/8 in
- Type: Center Cutting
Features and Benefits:
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.
This general purpose rougher is designed for high production metal removal in a wide range of work piece material. It is suitable for a very board spectrum of materials having up to high tensile strengths. In many cases, the milled surfaces are of acceptable quality.