YG-1 95109 EH969 JET-POWER Long Length Rougher End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, TiAlN Coated
YG1 95109
$77.27
/ EA
Out of Stock
- Mill Diameter: 5/16 in
- Mill Diameter - Decimal: 0.3125 in
- Mill Diameter - Fractional: 5/16 in
- Mill Diameter - Metric: 7.9375 mm
- Pitch: Fine
- Length of Cut: 3/4 in
- Shank Diameter: 5/16 in
- Shank Diameter - Decimal: 0.3125 in
- Shank Diameter - Fractional: 5/16 in
- Shank Diameter - Metric: 7.9375 mm
- Material: Carbide
- Finish/Coating: Bright / Uncoated
- Overall Length: 2-1/2 in
- Centercutting: Center Cutting
- Helix Angle: 45 deg
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Length of Cut - Decimal: 0.75 in
- Length of Cut - Fractional: 3/4 in
- Length of Cut - Metric: 19.05 mm
- Overall Length - Decimal: 2.5 in
- Overall Length - Fractional: 2-1/2 in
- Overall Length - Metric: 63.5 mm
- Single or Double End: Single End
- Number of Flutes: 4
Features and Benefits:
Suitable for low hardness materials (under HRc 45) alloy steels, tool steels, carbon steels, prehardened steels, stainless steels, inconel, nimonic, etc.
High chip removed and minimizing breakage of cutting edges.
Corner Protection againist chipping.
Suitable for low hardness materials (under HRc 45) alloy steels, tool steels, carbon steels, prehardened steels, stainless steels, inconel, nimonic, etc.
High chip removed and minimizing breakage of cutting edges.
Corner Protection againist chipping.