Kennametal

Kennametal 3580810 1.000 in Dia, 5 Flute, Solid Carbide, Corner Radius & Corner Chamfer End Mill

KENNAM 3580810
$1,039.89 / EA
Image for KENNAM 3580810
  • Centercutting: No Center Cutting
  • Mill Diameter: 1 in
  • Mill Diameter - Decimal: 1 in
  • Mill Diameter - Metric: 25.4 mm
  • Number of Flutes: 5
  • Length of Cut: 1-3/4 in
  • Material: Carbide
  • Finish/Coating: AlTiN
  • Shank Diameter: 1 in
  • Shank Diameter - Decimal: 1 in
  • Shank Diameter - Metric: 25.4 mm
  • Single or Double End: Single End
  • Overall Length: 4-1/2 in
  • Flute Direction: Right Hand
  • Helix Angle: 38 deg
  • Center Cutting: No Center Cutting
  • Chipbreaker: No
  • End Type: Corner Radius
  • Hand of Tool: R - Right
  • Length of Cut - Decimal: 1.75 in
  • Length of Cut - Fractional: 1-3/4 in
  • Length of Cut - Metric: 44.45 mm
  • Length Type: Regular Length
  • Overall Length - Decimal: 4.5 in
  • Overall Length - Fractional: 4-1/2 in
  • Overall Length - Metric: 114.3 mm
  • Variable Helix: No
  • Variable Index: No
  • Flute Type: Spiral
  • Kennametal standard dimensions.
  • Non-center cutting.
  • Ramping up to 3°.
  • Unequal flute spacing minimizes chatter for smoother machining.
  • Single tool for both roughing and finishing operations requiring fewer setups.
  • Five-flute geometry enables slotting up to 1 x D.
  • Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant
  • Aluminum titanium nitride (AlTiN) is one of the most abrasive-resistant and hardest of the coatings.

Standard/Approvals: UDDE1000J5BS

Application: • Used for high speed applications on cast iron, non-ferrous materials, plastics and other tough-to-machine materials.• It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.• Slotting: Square end• Side milling/shoulder milling: square end• Corner style: corner radius• Corner style: square end• Helix angle: 38°• Tool dimensions: flute configuration : 5• Trochoidal milling• Ramping: 3°

Kennametal 3580810 1.000 in Dia | 5 Flute | Solid Carbide | AlTiN | Corner Radius & Corner Chamfer End Mill

QTY
Add to List