OSG

OSG 36040311 3/32 in Milling Dia, 3/8 in LOC, 1-1/2 in OAL, 4 Flutes, Carbide, WXL® Coated, Square End Mills

OSG 36040311
$42.72 / EA
Product Image
  • Mill Diameter: 3/32 in
  • Number of Flutes: 4
  • Length of Cut: 3/8 in
  • Material: Carbide
  • Finish/Coating: WXL® Coated
  • Shank Diameter: 1/8 in
  • Shank Diameter - Decimal: 0.125 in
  • Shank Diameter - Fractional: 1/8 in
  • Shank Diameter - Metric: 3.175 mm
  • Overall Length: 1-1/2 in
  • Cutting Direction: Right Hand
  • Helix Angle: 30 deg
  • Cutter Diameter: 3/32 in
  • Cutter Diameter - Fractional: 3/32 in
  • Diameter: 3/32 in
  • Diameter - Decimal: 0.09375 in
  • Finish: WXL® Coated
  • Length of Cut - Fractional: 3/8 in
  • Overall Length - Decimal: 1.5 in
  • Overall Length - Fractional: 1-1/2 in
  • Series: EXOCARB® 3604
  • Shank Type: Shrink Fit
  • Flute Type: Spiral
  • Diameter - Fractional: 3/32 in
  • Diameter - Metric: 2.381 mm

End mills are used to cut and contour molds for plastic parts, which include electric home appliances, die casting dies for automotive parts and stamping molds. To meet today's demanding requirements (smaller size, lower weight and reduced cost), OSG has developed many carbide end mills that are excellent in both processing accuracy and durability.

  • Square end mills have sharp corners and are utilized when square right angles are needed
  • Ultra fine micrograin carbide the hardest most wear-resistant carbide possible for incredible wear-resistance
  • High precision geometry, high accuracy all but eliminates need for benching and rework for mold makers
  • High strength core diameter tools utilize thicker core diameters for the ultimate in strength and rigidity
  • WXL coating 1100 deg C oxidation temp and 3100 Hv in hardness, higher coating oxidation temp and hardness dramatically improve wear-resistance
  • Premium high performance carbide end mills for pre-hardened and hardened steels

Standards/Approvals: PROP65: When grinding or regrinding industrial cutting tools, residual grinding dust may occur. This dust may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov

OSG Square End Mill | Center Cutting High Performance Regular Length Single End | Series: EXOCARB 3604 | 3/32 in Cutter Dia | 1-1/2 in Overall Length | 3/8 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/8 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Shrink Fit Shank | Carbide | WXL Coated

QTY
Add to List