SGS 37168 Z5S Fractional High Performance Square End End Mill With Internal Coolant Channel, 7/16 in Dia Cutter, 5/8 in Length of Cut, 5 Flutes, 7/16 in Dia Shank, 2-1/2 in OAL, TA Coated
SGS 37168
$145.20
/ EA
- Centercutting: No Center Cutting
- Number of Flutes: 5
- Length of Cut: 5/8 in
- Material: Solid Carbide
- Finish/Coating: TA Coated
- Shank Diameter: 7/16 in
- Shank Diameter - Fractional: 7/16 in
- Overall Length: 1/2 in
- Cutting Direction: Right Hand
- Helix Angle: 37 deg
- Cutter Diameter: 7/16 in
- Cutter Diameter - Fractional: 7/16 in
- Flute Type: Spiral
- Length of Cut - Fractional: 5/8 in
- Overall Length - Fractional: 1/2 in
- Series: Z5S
- Shank Length: 1-7/8 in
- Shank Length - Fractional: 1-7/8 in
- Shank Type: Straight
- Type: Fractional High Performance Square End
- An ideal balance of helix, indexing, flute depth, rake and relief
- Variable indexing for chatter suppression and proprietary edge geometry for shearing and strength
- Chatter-free geometry allows deep cutting and high speed machining
- Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
- Excels at roughing, ramping, high speed machining and finishing in a variety of materials
- Recommended for materials
- Unequal flute spacing
- Aluminum titanium nitride (AlTiN) coating - excellent thermal and chemical resistance allows for dry cutting and improvements in performance of carbide
- the coating has a high hardness giving great protection against abrasive wear and erosion
- Applicable on steel, stainless steel, cast iron, high temperature alloys, titanium and hardened steel
- -0.002 in cutting diameter tolerance
- H6 shank diameter tolerance
- Positive rake
SGS® End Mill | High Performance Square End | Series: Z5 Z-Carb-HPR | 7/16 in Cutter Dia | 2-1/2 in Overall Length | 7/16 in | 5/8 in Maximum Depth of Cut | 5 Flutes | Spiral Flute | 7/16 in Shank Dia | Right Hand Cutting | 37 deg Helix Angle | Z-Carbide | AlTiN Coated (Ti-Namite A)