SGS 37194 Z5S High Performance Square End End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL, AlTiN Coated
SGS 37194
$264.80
/ EA
- Centercutting: No Center Cutting
- Number of Flutes: 5
- Length of Cut: 1-1/4 in
- Material: Carbide
- Finish/Coating: AlTiN Coated
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Overall Length: 1/4 in
- Cutting Direction: Right Hand
- Helix Angle: 37 deg
- Cutter Diameter: 1/2 in
- Diameter: 0.5 in
- Finish: AlTiN
- Flute Type: Spiral
- Length of Cut - Fractional: 1-1/4 in
- Overall Length - Fractional: 1/4 in
- Series: Z5S
- Shank Length: 2 in
- Shank Type: Weldon Flat
- Type: High Performance Square End
- Cutter Diameter - Fractional: 1/2 in
- Diameter - Decimal: 0.5 in
- The New Z-Carb HPR five flute roughing end mills are ideal for achieving high material removal rates (MRR) and a finish of 80 RMS or better on most materials
- The specialized five flute design is engineered for increased productivity over three and four flute end mills
- The variable indexing geometry allows for improved chatter suppression over symmetrical designs
- With excellent thermal and chemical resistance, Ti-NAMITE-A allows for dry cutting and improvements in performance of carbide
- The coating has a high hardness giving ultimate protection against abrasive wear and erosion
- Ideal for cast iron, high temperature alloys, steels, and stainless steel applications
- +0.0000/-0.0020 in D1, h6 D2 Tolerance
Application: Aerospace Structural Components, Medical Implants, Automotive and Heavy Transportation, Energy and Power Generation, Castings and Forgings and General Engineering
SGS® End Mill | Fractional High Performance Square End | Series: Z5S | 1/2 in Cutter Dia | 3-1/4 in Overall Length | 1-1/4 in Maximum Depth of Cut | 5 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 37 deg Helix Angle | Weldon Flat Shank | 2 in Shank Length | Carbide | AlTiN Coated