OSG 5918300 1 deg taper per side,1/2 in Milling Dia, 5-3/8 in OAL, M42 HSS-CO, Bright, Tapered End Mills
OSG 5918300
$142.83
/ EA
Out of Stock
- Material: High Speed Steel - Cobalt
- End Type: Center Cutting
- Taper Angle Per Side: 1 deg
- Small End Diameter: 1/2 in
- Small End Diameter - Decimal: 0.0781 in
- Small End Diameter - Fractional: 1/2 in
- Shank Diameter: 0.625 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- Length of Cut: 3.25 in
- Number of Flutes: 3
- Helix Angle: 25 deg
- Finish/Coating: Bright / Uncoated
- Overall Length: 5.375 in
- Centercutting: Center Cutting
- Cutter Diameter: 1/2 in
- Cutting Direction: Right Hand
- Diameter: 1/2 in
- End Shape: Square
- Flute Direction: Right Hand
- Length of Cut - Decimal: 3.25 in
- Length of Cut - Fractional: 3-1/4 in
- Length of Cut - Metric: 82.55 mm
- Material Grade: M42
- Mill Diameter: 0.5 in
- Mill Diameter - Decimal: 0.5 in
- Mill Diameter - Fractional: 1/2 in
- Mill Diameter - Metric: 12.7 mm
- Overall Length - Decimal: 5.375 in
- Overall Length - Fractional: 5-3/8 in
- Overall Length - Metric: 136.525 in
- Series: 591
- Series/List: 591
- Taper Angle: 1 deg
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1/2 in
- Diameter - Fractional: 1/2 in
- Diameter - Metric: 12.7 mm
- Diameter - Decimal: 0.5 in
- Shank Type: Weldon Flat
- Finish: Bright
HSS-Co END MILL High Performance Cobalt HSS End Mills for General Milling Applications
- Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys
- Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
OSG 5918300 Material HSS-CO | End Type Center Cutting | Taper Angle Per Side 1 Degree | Tapered End Mill