KEO Cutters

KEO 70580 Staggered Tooth T-Slot Milling Cutter, 1-1/4 in Dia Cutter, 31/64 in W Cutting, 8 Teeth, 1 in Dia Shank, 3-15/16 in OAL

KEO 964-000-077
$283.36 / EA
Out of Stock
KEO 70580 Staggered Tooth T-Slot Milling Cutter, 1-1/4 in Dia Cutter, 31/64 in W Cutting, 8 Teeth, 1 in Dia Shank, 3-15/16 in OAL
  • Shank Diameter - Decimal: 1 in
  • Shank Diameter - Metric: 25.4 mm
  • Diameter - Fractional: 1-1/4 in
  • Length: 3-15/16 in
  • Width: 31/34 in
  • Diameter - Decimal: 1.25 in
  • Diameter - Metric: 31.75 mm
  • 21/32 in dia neck
  • Right hand cutting direction
  • T-slot milling cutters have staggered teeth on the circumferential surface and teeth on both sides
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
  • When run in a counterclockwise direction spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Side teeth alternate to provide maximum chip clearance and stability to permit rapid milling of t-slots with minimum risk of breakage

Standards/Approval: ISO 9001:2008

KEO T-Slot Milling Cutter | Staggered Tooth | 1-1/4 in Cutter Dia | 3-15/16 in Overall Length | 31/64 in Cutting Width | 1 in Shank Dia | Straight/Weldon Flat Shank | 2-9/32 in Shank Length | 8 Teeth | HSS | Uncoated

QTY
Add to List