Emuge 1926A.0375 Square End Mills 3/8in Milling Dia, 7/8in LOC, 2-1/2in OAL, 4 Flutes, Carbide
EMUGE 1926A.0375
$151.52
/ EA
Out of Stock
- Mill Diameter: 0.375 in
- Mill Diameter - Decimal: 0.375 in
- Mill Diameter - Fractional: 3/8 in
- Mill Diameter - Metric: 9.525 mm
- Number of Flutes: 4
- Material: Carbide
- Finish/Coating: TiAlN
- Length of Cut: 0.875 in
- Shank Diameter: 0.375 in
- Shank Diameter - Decimal: 0.375 in
- Shank Diameter - Fractional: 3/8 in
- Shank Diameter - Metric: 9.525 mm
- Overall Length: 2.5 in
- Centercutting: Center Cutting
- Helix Angle: 50 deg
- Coolant Through: No
- Cutter Diameter: 3/8 in
- Cutter Diameter - Fractional: 3/8 in
- Cutting Direction: Right Hand
- Extended Reach: Yes
- Flute Direction: Right Hand
- Length of Cut - Decimal: 0.875 in
- Length of Cut - Fractional: 7/8 in
- Length of Cut - Metric: 22.22 mm
- Overall Length - Decimal: 2.5 in
- Overall Length - Fractional: 2-1/2 in
- Overall Length - Metric: 63.5 mm
- Series: Jet-Cut 1926A
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Flute Type: Spiral
- Jet-Cut carbide end mills are designed to mill a wide range of materials with high performance milling feed rates
- Vibration dampening variable flute spacing
- Series 1926A cutting face rake angle +10 deg for roughing/finishing up to 50 Rc
- For use in steels, copper alloys, cast iron and hardened steels
- Tighter manufacturing tolerances on cutting diameter
- TiAlN coated for heat and wear resistance
- High metal removal rate combined with the best possible surface quality
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For finishing applications
Emuge Square End Mill | Long Length | Series: Jet-Cut 1926A | 3/8 in Cutter Dia | 2-1/2 in Overall Length | 7/8 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 3/8 in Shank Dia | Right Hand Cutting | 50 deg Helix Angle | Weld-On Flat Shank | Carbide | TiAlN Coated