Emuge 1973A.009375 Ball End Mills 3/32in Milling Dia, 1/16in LOC, 2in OAL, 2 Flutes, Carbide
EMUGE 1973A.009375
$108.68
/ EA
Out of Stock
- Mill Diameter: 3/32 in
- Mill Diameter - Fractional: 3/32 in
- Number of Flutes: 2
- Length of Cut: 1/16 in
- Material: Carbide
- Overall Length: 2 in
- Shank Diameter: 1/4 in
- Shank Diameter - Fractional: 1/4 in
- Shank Diameter - Metric: 0.25 in
- Finish/Coating: TiAlN Coated
- Helix Angle: 30 deg
- Cutter Diameter: 3/32 in
- Cutter Diameter - Fractional: 3/32 in
- Cutting Direction: Right Hand
- Length of Cut - Fractional: 1/16 in
- Series: Hard-Cut 1973A
- Shank Diameter Metric: 0.25 in
- Shank Type: Cylindrical
- Flute Type: Spiral
- The Hard-Cut ball nose series of carbide end mills is specifically developed for machining hardened materials well suited for the die and mold industry and are manufactured with extremely tight tolerances
- Patented chisel edge contour
- Designed for milling hardened materials up to 44-66 Rc
- Short flute length with 30 deg helix angle
- Reduced neck design options
- TiAlN coated for heat and wear resistance
Standards/Approvals: DIN 6535 HA|ASME B94.19|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For finishing applications
Emuge Ball Nose End Mill | Stub Length | Series: Hard-Cut 1973A | 3/32 in Diameter Cutter | 2 in Overall Length | 1/16 in Maximum Depth of Cut | 2 Flutes | Spiral Flute | 1/4 in Shank Diameter | Right Hand Cutting Direction | 30 deg Helix Angle | Cylindrical Shank | Carbide | TiAlN Coated