Emuge 2579Tz.0250 Square End Mills 1/4in Milling Dia, 3XD LOC, 2-1/2in OAL, 4 Flutes, Carbide
EMUGE 2579TZ.0250
$173.38
/ EA
- Mill Diameter: 0.25 in
- Mill Diameter - Decimal: 0.25 in
- Mill Diameter - Fractional: 1/4 in
- Number of Flutes: 4
- Length of Cut: 0.75 in
- Material: Carbide
- Finish/Coating: TiN/TiAlN
- Shank Diameter: 0.25 in
- Shank Diameter - Decimal: 0.25 in
- Shank Diameter - Fractional: 1/4 in
- Single or Double End: Single End
- Overall Length: 2.5 in
- Flute Direction: Right Hand
- Cutting Direction: Right Hand
- Helix Angle: 38 - 42 deg
- Coolant Through: Yes
- Cutter Diameter: 1/4 in
- Length of Cut - Fractional: 3/4 in
- Overall Length - Decimal: 2.5 in
- Overall Length - Fractional: 2-1/2 in
- Series: Trochoidal TiNox-Cut 2579TZ
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1/4 in
- Shank Type: Weldon Flat
- The Trochoidal TiNox-Cut series was especially developed for use with advanced milling strategies in machining titanium alloys, nickel based alloys and stainless steel
- Vibration dampening with variable helix/flute spacing
- Heat and wear resistant multi-layer TiN/TiAlN - PVD coating
- Roughing/finishing flute profile for optimum performance
- Staggered chip breaker design for even wear in depths up to 3XD
- Coolant fed (axial) design for efficient chip evacuation
- Machining of difficult to cut materials
Standards/Approvals: DIN 6535|PROP65: This product contains Cobalt, a chemical known to the State of California to cause cancer
For roughing and finishing applications
Emuge Square End Mill | Series: Trochoidal TiNox-Cut 2579TZ | 1/4 in Cutter Dia | 2-1/2 in Overall Length | 3XD Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1/4 in Shank Dia | Right Hand Cutting | 38/42 deg Helix Angle | Weld-On Flat Shank | Carbide | TiN/TiAlN Coated