Kennametal 6676996 0.3125 in Dia, 4 Flute, Solid Carbide, Corner Radius & Corner Chamfer End Mill
KENNAM 6676996
$63.56
/ EA
Out of Stock
- Mill Diameter: 5/16 in
- Mill Diameter - Decimal: 0.3125 in
- Mill Diameter - Fractional: 5/16 in
- Mill Diameter - Metric: 7.9375 mm
- Chamfer Width: 0.015 in
- Number of Flutes: 4
- Material: Carbide
- Length of Cut: 1/2 in
- Shank Diameter: 5/16 in
- Shank Diameter - Decimal: 0.3125 in
- Shank Diameter - Fractional: 5/16 in
- Shank Diameter - Metric: 7.9375 mm
- Overall Length: 2 in
- Helix Angle: 36 deg
- Variable Index: Yes
- Center Cutting: Center Cutting
- Centercutting: Center Cutting
- Chipbreaker: No
- End Type: Corner Chamfer
- Finish/Coating: AlTiN
- Hand of Tool: R - Right
- Length of Cut - Decimal: 0.5 in
- Length of Cut - Fractional: 1/2 in
- Length of Cut - Metric: 12.7 mm
- Length Type: Regular Length
- Material Grade: KCSM15
- Overall Length - Decimal: 2 in
- Overall Length - Metric: 50.8 mm
- Single or Double End: Single End
- Variable Helix: Yes
- Flute Type: Spiral
- Shank Type: Straight
- Flute Direction: Right Hand
- Aluminum titanium nitride (AlTiN) is one of the most abrasive-resistant and hardest of the coatings.
Standard/Approvals: KCPM15, H1TE4CH0313S050HA
Application: • Side Milling/Shoulder Milling: Eased Chamfer• Helical Milling, Pocketing• Slotting: Square End• Side Milling/Shoulder Milling: Roughing• Trochoidal Milling• Ramping: Blank• Plunge Milling• Tool Dimensions: Flute Configuration: 4• Shank - Cylindrical Plain
Kennametal 6676996 0.3125 in Dia | 4 Flute | Solid Carbide | AlTiN | Corner Radius & Corner Chamfer End Mill