Niagara Cutter Stabilizer™ GP 17002947 STBN430 Ball End Center Cutting Short Length Single End End Mill, 1 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1 in Dia Shank, 6 in OAL, AlTiN Coated
NIACUT 17002947
$611.78
/ EA
Out of Stock
- Mill Diameter: 1 in
- Number of Flutes: 4
- Length of Cut: 1-1/4 in
- Material: Solid Carbide
- Overall Length: 6 in
- Shank Diameter: 1 in
- Shank Diameter - Decimal: 1 in
- Shank Diameter - Metric: 25.4 mm
- Helix Angle: Variable
- Cutter Diameter: 1 in
- Cutter Diameter - Decimal: 1 in
- Cutter Diameter - Metric: 25.4 mm
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Finish: AlTiN
- Flute Type: Variable Spiral
- Length of Cut - Fractional: 1-1/4 in
- Length Type: Short Length
- Series: STBN430
- Shank Type: Weldon Flat
- Type: Center Cutting
- Solid carbide provides better rigidity than high speed steel, it is extremely heat resistant and used for high speed applications on cast iron, non-ferrous materials, plastics and other tough-to-machine materials
- Aluminum titanium nitride (AlTiN) is one of the most abrasive-resistant and hardest of the coatings, it is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel
- 90 deg cutting edge
- 2.281 in L minimum clamping
- 9 deg radial rake
- 4 in L reach
- 0.96 in Dia neck
- Eccentric primary relief
- Weldon flat standard on shank sizes 3/8 in and larger
- E - Neck tool shape
- Asymmetrical flute geometry
- Ideal for carbon steels, alloy steels, tool steels, cast iron and copper
Profiling and Slotting Applications
Niagara Cutter Stabilizer GP End Mill | Ball End Center Cutting Short Length Single End | Series: STBN430 | 1 in Cutter Dia | 6 in Overall Length | 1 in | 1-1/4 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 1 in Shank Dia | Right Hand Cutting | Variable Helix Angle | Weldon Flat Shank | ANSI Code: STBN430-1.000-E2-B.3-Z4 | ISO Code: STBN4301.00E2B.3Z4 | Solid Carbide | AlTiN Coated