Niagara Cutter 17007774 REC448 Center Cutting Long Length Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 2-1/2 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 4-5/8 in OAL, TiAlN Coated
NIACUT 17007774
$125.06
/ EA
Out of Stock
- Mill Diameter: 5/8 in
- Mill Diameter - Decimal: 0.625 in
- Mill Diameter - Fractional: 5/8 in
- Mill Diameter - Metric: 15.87 mm
- Pitch: Fine
- Length of Cut: 2-1/2 in
- Shank Diameter: 5/8 in
- Shank Diameter - Decimal: 0.625 in
- Shank Diameter - Fractional: 5/8 in
- Shank Diameter - Metric: 15.875 mm
- Material: HSS-Co8
- Finish/Coating: TiAlN
- Overall Length: 4-5/8 in
- Centercutting: Center Cutting
- Helix Angle: 30 deg
- Chipbreaker: No
- Diameter: 5/8 in
- Diameter - Metric: 15.87 mm
- Flute Direction: Right Hand
- Length of Cut - Decimal: 2.5 in
- Length of Cut - Fractional: 2-1/2 in
- Length of Cut - Metric: 63.5 mm
- Overall Length - Decimal: 4.625 in
- Overall Length - Fractional: 4-5/8 in
- Overall Length - Metric: 117.475 mm
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Variable Helix: No
- Diameter - Fractional: 5/8 in
- Number of Flutes: 4
- Variable Index: No
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Center Cutting Long Length Single End | Series: REC448 | 5/8 in Cutter Dia | 0.03 in Corner Radius | 4-5/8 in Overall Length | 2-1/2 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 5/8 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: REC448-0.625-D4-C030.3-Z4 | ISO Code: REC448.625D4C030.3Z4 | M42 HSS-Co 8 | TiAlN Coated