Niagara Cutter 17010387 REM445 Non-Center Cutting Stub Length Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3 in OAL, Uncoated
NIACUT 17010387
$81.80
/ EA
Out of Stock
- Mill Diameter: 3/4 in
- Mill Diameter - Decimal: 0.75 in
- Mill Diameter - Fractional: 3/4 in
- Mill Diameter - Metric: 19.05 mm
- Pitch: Fine
- Length of Cut: 3/4 in
- Shank Diameter: 3/4 in
- Shank Diameter - Decimal: 0.75 in
- Shank Diameter - Fractional: 3/4 in
- Shank Diameter - Metric: 19.05 mm
- End Type: Square
- Material: HSS-Co8
- Finish/Coating: Bright / Uncoated
- Overall Length: 3 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Chamfer Angle: 45 deg
- Chipbreaker: No
- Corner Radius: 0.03 in
- Cutter Diameter: 3/4 in
- Cutter Diameter - Fractional: 3/4 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Length of Cut - Decimal: 0.75 in
- Length of Cut - Fractional: 3/4 in
- Length of Cut - Metric: 19.05 mm
- Overall Length - Decimal: 3 in
- Overall Length - Metric: 76.2 mm
- Series: REM445
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Type: Non-Center Cutting
- Variable Helix: No
- Flute Type: Spiral
- Diameter - Metric: 19.05 mm
- Diameter - Fractional: 3/4 in
- Number of Flutes: 4
- Flute Direction: Right Hand
- Variable Index: No
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Non-Center Cutting Stub Length Single End | Series: REM445 | 3/4 in Cutter Dia | 0.03 in Corner Radius | 3 in Overall Length | 3/4 in Maximum Depth of Cut | 4 Flutes | Spiral Flute | 3/4 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: REM445-0.750-D1-C030.3-Z4 | ISO Code: REM445.750D1C030.3Z4 | M42 HSS-Co 8 | Uncoated