Niagara Cutter 17011737 SPC408 Center Cutting Medium Length Single End Square End End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 6 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL, Uncoated
NIACUT 17011737
$42.78
/ EA
Out of Stock
- Mill Diameter: 1/2 in
- Number of Flutes: 6
- Length of Cut: 1-1/4 in
- Material: M42 8% Cobalt
- Finish/Coating: Uncoated
- Shank Diameter: 1/2 in
- Shank Diameter - Decimal: 0.5 in
- Shank Diameter - Fractional: 1/2 in
- Shank Diameter - Metric: 12.7 mm
- Overall Length: 3-1/4 in
- Cutting Direction: Right Hand
- Helix Angle: 30 deg
- Arbor/Shank Size: 1/2 in
- Capacity: 5.5 mm
- Cutter Diameter: 1/2 in
- Cutter Diameter - Decimal: 0.5 in
- Cutter Diameter - Metric: 12.7 mm
- Length of Cut - Fractional: 1-1/4 in
- Length Type: Medium Length
- Overall Length - Fractional: 3-1/4 in
- Series: SPC408
- Shank Type: Weldon Flat
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1/2 in
- Type: Center Cutting
- Finish: Uncoated
- Cobalt is harder than high speed steel and provides better wear resistance, it is commonly used on high tensile alloys
- Uncoated tools do not feature supportive treatments on the cutting edge, they are used at reduced speeds for general applications on non-ferrous metals
- 90 deg cutting edge
- 1.781 in L minimum clamping
- 30 deg axial rake
- 10 deg radial rake
- Square nose end mills create sharp, unrounded cuts
- Center cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- D - Cylindrical tool shape
For profiling and slotting in all materials
Niagara Cutter End Mill | Center Cutting Medium Length Single End Square End | Series: SPC408 | 1/2 in Cutter Dia | 3-1/4 in Overall Length | 1/2 in | 1-1/4 in Maximum Depth of Cut | 6 Flutes | Spiral Flute | 1/2 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: SPC408-0.500-D3-S.3-Z6 | ISO Code: SPC408.500D3S.3Z6 | M42 8% Cobalt | Uncoated