Niagara Cutter 17013520 REM710 Non-Center Cutting Single End Stub Length End Mill, 1-1/2 in Dia Cutter, 0.04 in Corner Radius, 8 in Length of Cut, 6 Flutes, 1-1/4 in Dia Shank, 10-1/2 in OAL, TiCN Coated
NIACUT 17013520
$623.00
/ EA
Out of Stock
- Mill Diameter: 1-1/2 in
- Mill Diameter - Decimal: 1.5 in
- Mill Diameter - Fractional: 1-1/2 in
- Mill Diameter - Metric: 38.1 mm
- Pitch: Coarse
- Length of Cut: 8 in
- Shank Diameter: 1-1/4 in
- Shank Diameter - Decimal: 1.25 in
- Shank Diameter - Fractional: 1-1/4 in
- Shank Diameter - Metric: 31.75 mm
- End Type: Square End
- Material: HSS-Co8
- Finish/Coating: TiCN
- Overall Length: 10-1/2 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Chamfer Width: 0.04 in
- Chamfer Width - Decimal: 0.04 in
- Chipbreaker: No
- Corner Radius: 0.04 in
- Cutter Diameter: 1-1/2 in
- Cutting Direction: Right Hand
- Diameter: 1-1/2 in
- Diameter - Fractional: 1-1/2 in
- Length of Cut - Decimal: 8 in
- Length of Cut - Metric: 203.2 mm
- Number of Flutes: 6
- Overall Length - Decimal: 10.5 in
- Overall Length - Fractional: 10-1/2 in
- Overall Length - Metric: 266.7 mm
- Shank Type: Weldon Flat
- Single or Double End: Single End
- Variable Helix: No
- Flute Type: Spiral
- Cutter Diameter - Fractional: 1-1/2 in
- Diameter - Metric: 38.1 mm
- Flute Direction: Right Hand
- Variable Index: No
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Non-Center Cutting Single End Stub Length | Series: REM710 | 1-1/2 in Cutter Dia | 0.04 in Corner Radius | 10-1/2 in Overall Length | 8 in Maximum Depth of Cut | 6 Flutes | Spiral Flute | 1-1/4 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: REM710-1.500-P10-C040.3-Z6 | ISO Code: REM7101.500P10C040.3Z6 | M42 HSS-Co 8 | TiCN Coated