Niagara Cutter 17013534 REM710 Extended Reach Non-Center Cutting Single End End Mill, 2 in Dia Cutter, 0.04 in Corner Radius, 6 in Length of Cut, 8 Flutes, 2 in Dia Shank, 9-3/4 in OAL, TiCN Coated
NIACUT 17013534
$619.39
/ EA
Out of Stock
- Mill Diameter: 2 in
- Mill Diameter - Decimal: 2 in
- Mill Diameter - Metric: 50.8 mm
- Pitch: Coarse
- Length of Cut: 6 in
- Shank Diameter: 2 in
- Shank Diameter - Decimal: 2 in
- Shank Diameter - Metric: 50.8 mm
- End Type: Square
- Material: HSS-Co8
- Finish/Coating: TiCN
- Overall Length: 9-3/4 in
- Centercutting: No Center Cutting
- Helix Angle: 30 deg
- Chamfer Angle: 45 deg
- Chamfer Width: 0.04 in
- Chamfer Width - Decimal: 0.04 in
- Chipbreaker: No
- Corner Radius: 0.04 in
- Cutter Diameter: 2 in
- Cutting Direction: Right Hand
- Diameter: 0.197 in
- Diameter - Decimal: 0.197 in
- Diameter - Metric: 50.8 mm
- Flute Direction: Right Hand
- Length of Cut - Decimal: 6 in
- Length of Cut - Metric: 152.4 mm
- Number of Flutes: 8
- Overall Length - Decimal: 9.75 in
- Overall Length - Fractional: 9-3/4 in
- Overall Length - Metric: 247.65 mm
- Series: REM710
- Single or Double End: Single End
- Type: Non-Center Cutting
- Variable Helix: No
- Flute Type: Spiral
- Shank Type: Weldon Flat
- Variable Index: No
General Purpose, Profiling and Slotting
Niagara Cutter End Mill | Extended Reach Non-Center Cutting Single End | Series: REM710 | 2 in Cutter Dia | 0.04 in Corner Radius | 9-3/4 in Overall Length | 6 in Maximum Depth of Cut | 8 Flutes | Spiral Flute | 2 in Shank Dia | Right Hand Cutting | 30 deg Helix Angle | Weldon Flat Shank | ANSI Code: REM710-2.000-D5-C040.7-Z8 | ISO Code: REM7102.000D5C040.7Z8 | M42 HSS-Co 8 | TiCN Coated